60in Z Master® Professional 6000 EFI with Horizon™ Tech

Description

Overview

The Toro Z Master® Professional 6000 EFI Series is Toro’s most advanced zero-turning radius mower. Everything added to this series was developed with the landscape professional in mind.

This model features 152.4 cm cutting deck, 999 cc Kohler® Electronic Fuel Injection (EFI) engine with Toro’s exclusive, new Horizon™ Technology system and electronic governor (E-Gov) to provide maximum productivity with reduced carbon footprint and at the same time increase fuel efficiency. It’s technology that refined the Z Master® to make a great commercial mower even better.

Features

Kohler® EFI Engine

Kohler® Closed-Loop EFI engine provides the highest productivity with the lowest operating cost and reduced carbon footprint. It’s the easiest, the most reliable starting engine and backed by Kohler’s unlimited hour three year commercial warranty*. The electronic governor system eliminates governor droop and regulates the engine speed at varying loads, which improves fuel efficiency.

*See your certified Toro dealer for full details on warranties.

Toro Horizon™ Technology and Electronic Governor (E-Gov)

The Toro® Horizon™ Technology system is an on-board intelligence platform that enables communication and response between key systems on the mower. It enhances the machines’ overall performance in a wide range of mowing conditions, hence increasing fuel efficiency.

The Toro® Horizon™ system uses a speed control module and a throttle/rocker switch (Max, Economy and Low modes) to interact with the Kohler® EFI and electronic governor systems to command engine RPM and throttle plate angle according to load.

Exclusive TURBO FORCE® Deck

The rugged TURBO FORCE® deck is constructed of 7-gauge, high-strength steel with bull-nose bumper, which is 33% thicker and 32% higher in yield strength than ordinary 10-gauge commercial steel. The combined effect is 75% stronger, so it easily handles the most demanding conditions and resists damage from impacts and abrasion.

Semi-Pneumatic Flat-Free Caster Tyres

Eliminate time-consuming flats.

Unibody Frame

Lighter and more durable frame. The frame has been positioned lower to the ground, improving centre of gravity, balance and traction in most conditions. As an added perk, it’s made the machine easier to handle.

Twin Unitised Pump and Wheel Motor Transmissions with Cooling Fans

Proven commercial hydraulic components while eliminating hoses and other potential leak points. You’ll get a smoother, faster response while enjoying an even more reliable machine.

Instrument Panel

The easy to see instrument panel includes a digital hour meter, fuel gauge, voltage meter and diagnostics indicators for troubleshooting at a glance.

Operator Comfort and Control

Deluxe suspension seat features thick cushions, large bolsters and 3-D isolator mounts that absorb bumps and vibrations to reduce operator fatigue.

Folding Rollover Protection System

A Rollover Protection System (ROPS), complete with seat belt, comes standard for operator protection in the case of accidental rollovers and tipovers. In situations where sufficient vertical clearance is not available, such as loading on an enclosed trailer, the ROPS can be temporarily unlocked and folded down.

 

Specifications

Engine

34 hp (25.4 kW) Kohler® Command Pro EFI ECV940, electronic governor and Toro®Horizon™ Technology 999 cc

Cutting Width

152.4 cm

Deck Material TURBO FORCE® 7-gauge high-strength steel with bull-nose front bumper
Deck Type Side discharge tools-free adjustable baffle
Fuel Capacity

45.42 Litres

Maximum Forward Speed

18.5 km/h

Drive Tyres 24" x 12" - 12"
Caster Tyres 13" x 6.5" - 6" flat-free semi pneumatic
Height of Cut 1.0" - 5.5"
Rubber Discharge Chute Standard
Spindle Housing 9" diameter cast iron
Spindle Bearings Maintenance-free ball bearings 
Blades 0.25" heat-treated steel
Blade Tip Speed 18,500+ ft/min
Carrier Frame Construction 3" x 1.5" x 10 gauge
Warranty*

5 years/1400 hours limited warranty and 5 years/1400 hours spindle limited warranty

*See your certified Toro dealer for full details on warranties.

 

 *Approved applicants only. Fees, terms, conditions & minimum finance amount apply, incl $99 Annual Fee charged on the account open date and annually on the anniversary of that date. Annual Fee must be paid in full within 90 days or it will attract interest. 90 days Interest Free and no repayments available on all Skye Mastercard purchases (excluding cash withdrawals). Standard Card Purchase Rate applies to any outstanding balance after the 90 day Interest Free and no repayment period. Minimum monthly repayment required. Interest, (charged at the Expired Promotional Rate) payable on outstanding balances after any Interest Free Period. See skyecard.com.au for current interest rates. ^The indicative repayments advertised exclude the $99 Annual Fee. The Annual Fee needs to be paid in full within the 90 day Interest Free term to avoid interest charges. The indicative repayments assume no additional purchases, cash advances or any other fees and charges. Only available at Skye retail partners. Credit provided by FlexiCards Australia Pty Ltd ABN 31 099 651 877 Australian Credit Licence number 247415. FlexiCards Australia is a subsidiary of FlexiGroup Limited.

Similar Products

NEW 42in Timecutter® SS4225

Find out more

60in (152 cm) Z Master 2000 Series MyRIDE® HDX

Find out more

52in (132 cm) Z Master 2000 Series MyRIDE® HDX

Find out more

NEW 54in TITAN® MyRIDE® Zero Turn Mower 75312TA

Find out more

Location

119-121 Prince St

Grafton NSW 2460

Find Us on Google Maps

Business Hours

  • Monday to Friday : 8:30 AM - 5:00 PM
  • Saturday : 8:30 AM - 12:00 PM
  • Sunday : Closed

Contact Us